Add local bin folder

21 files changed, 447 insertions, 0 deletions

diff --git a/.local/bin/displayselect b/.local/bin/displayselect
new file mode 100755
index 0000000..745fdeb
--- /dev/null
+++ b/.local/bin/displayselect
@@ -0,0 +1,70 @@
+#!/bin/sh
+
+# A UI for detecting and selecting all displays. Probes xrandr for connected
+# displays and lets user select one to use. User may also select "manual
+# selection" which opens arandr.
+
+twoscreen() { # If multi-monitor is selected and there are two screens.
+
+    mirror=$(printf "no\\nyes" | dmenu -i -p "Mirror displays?")
+    # Mirror displays using native resolution of external display and a scaled
+    # version for the internal display
+    if [ "$mirror" = "yes" ]; then
+        external=$(echo "$screens" | dmenu -i -p "Optimize resolution for:")
+        internal=$(echo "$screens" | grep -v "$external")
+
+        res_external=$(xrandr --query | sed -n "/^$external/,/\+/p" | \
+            tail -n 1 | awk '{print $1}')
+        res_internal=$(xrandr --query | sed -n "/^$internal/,/\+/p" | \
+            tail -n 1 | awk '{print $1}')
+
+        res_ext_x=$(echo $res_external | sed 's/x.*//')
+        res_ext_y=$(echo $res_external | sed 's/.*x//')
+        res_int_x=$(echo $res_internal | sed 's/x.*//')
+        res_int_y=$(echo $res_internal | sed 's/.*x//')
+
+        scale_x=$(echo "$res_ext_x / $res_int_x" | bc -l)
+        scale_y=$(echo "$res_ext_y / $res_int_y" | bc -l)
+
+        xrandr --output "$external" --auto --scale 1.0x1.0 \
+            --output "$internal" --auto --same-as "$external" \
+            --scale "$scale_x"x"$scale_y"
+    else
+
+        primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
+        secondary=$(echo "$screens" | grep -v "$primary")
+        direction=$(printf "left\\nright" | dmenu -i -p "What side of $primary should $secondary be on?")
+        xrandr --output "$primary" --auto --scale 1.0x1.0 --output "$secondary" --"$direction"-of "$primary" --auto --scale 1.0x1.0
+    fi
+    }
+
+morescreen() { # If multi-monitor is selected and there are more than two screens.
+	primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
+	secondary=$(echo "$screens" | grep -v "$primary" | dmenu -i -p "Select secondary display:")
+	direction=$(printf "left\\nright" | dmenu -i -p "What side of $primary should $secondary be on?")
+	tertiary=$(echo "$screens" | grep -v "$primary" | grep -v "$secondary" | dmenu -i -p "Select third display:")
+	xrandr --output "$primary" --auto --output "$secondary" --"$direction"-of "$primary" --auto --output "$tertiary" --"$(printf "left\\nright" | grep -v "$direction")"-of "$primary" --auto
+	}
+
+multimon() { # Multi-monitor handler.
+	case "$(echo "$screens" | wc -l)" in
+		1) xrandr $(echo "$allposs" | grep -v "$screens" | awk '{print "--output", $1, "--off"}' | tr '\n' ' ') ;;
+		2) twoscreen ;;
+		*) morescreen ;;
+	esac ;}
+
+# Get all possible displays
+allposs=$(xrandr -q | grep "connected")
+
+# Get all connected screens.
+screens=$(echo "$allposs" | grep " connected" | awk '{print $1}')
+
+# Get user choice including multi-monitor and manual selection:
+chosen=$(printf "%s\\nmulti-monitor\\nmanual selection" "$screens" | dmenu -i -p "Select display arangement:") &&
+case "$chosen" in
+	"manual selection") arandr ; exit ;;
+	"multi-monitor") multimon ;;
+	*) xrandr --output "$chosen" --auto --scale 1.0x1.0 $(echo "$allposs" | grep -v "$chosen" | awk '{print "--output", $1, "--off"}' | tr '\n' ' ') ;;
+esac
+
+pgrep -x dunst >/dev/null && killall dunst && setsid dunst & # Restart dunst to ensure proper location on screen
diff --git a/.local/bin/dmenu_shudown b/.local/bin/dmenu_shudown
new file mode 100755
index 0000000..ed868e7
--- /dev/null
+++ b/.local/bin/dmenu_shudown
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+choice=$(printf "no\\nYES" | dmenu -p "Shutdown?")
+
+if [ "$choice" = "YES" ]; then
+
+    choice=$(printf "no\\nYES" | dmenu -p "Are you sure?")
+    if [ "$choice" = "YES" ]; then
+        echo "Shutting down"
+        # shutdown -h now
+    fi
+fi
diff --git a/.local/bin/dmenupass b/.local/bin/dmenupass
new file mode 100755
index 0000000..59aa75f
--- /dev/null
+++ b/.local/bin/dmenupass
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# This script is the SUDO_ASKPASS variable, meaning that it will be used as a
+# password prompt if needed.
+
+dmenu -fn "Monospace-18" -P -p "$1" <&- && echo
+
diff --git a/.local/bin/doc_compiler b/.local/bin/doc_compiler
new file mode 100755
index 0000000..1ae86bc
--- /dev/null
+++ b/.local/bin/doc_compiler
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+# This script will compile or run another finishing operation on a document. I
+# have this script run via vim.
+#
+# Compiles .tex. groff (.mom, .ms), .rmd, .md.  Opens .sent files as sent
+# presentations.  Runs scripts based on extention or shebang
+
+file=$(readlink -f "$1")
+dir=$(dirname "$file")
+base="${file%.*}"
+
+cd "$dir" || exit
+
+textype() { \
+	command="pdflatex"
+	( sed 5q "$file" | grep -i -q 'xelatex' ) && command="xelatex"
+	$command --output-directory="$dir" "$base" &&
+	grep -i addbibresource "$file" >/dev/null &&
+	biber --input-directory "$dir" "$base" &&
+	$command --output-directory="$dir" "$base" &&
+	$command --output-directory="$dir" "$base"
+}
+
+case "$file" in
+	*\.ms) refer -PS -e "$file" | groff -me -ms -kept -T pdf > "$base".pdf ;;
+	*\.mom) refer -PS -e "$file" | groff -mom -kept -T pdf > "$base".pdf ;;
+	*\.[0-9]) refer -PS -e "$file" | groff -mandoc -T pdf > "$base".pdf ;;
+	*\.[rR]md) Rscript -e "require(rmarkdown); rmarkdown::render('$file', quiet=TRUE)" ;;
+	*\.tex) textype "$file" ;;
+	*\.md) pandoc "$file" --pdf-engine=xelatex -o "$base".pdf ;;
+	*config.h) sudo make install ;;
+    *\.c) cc "$file" -o "$base" && "$base" ;;
+	*\.py) python "$file" ;;
+	*\.go) go run "$file" ;;
+	*\.sent) setsid sent "$file" 2>/dev/null & ;;
+	*) sed 1q "$file" | grep "^#!/" | sed "s/^#!//" | xargs -r -I % "$file" ;;
+esac
diff --git a/.local/bin/edit_screen.sh b/.local/bin/edit_screen.sh
new file mode 100755
index 0000000..39eda14
--- /dev/null
+++ b/.local/bin/edit_screen.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+tmpfile=$(mktemp /tmp/st-edit.XXXXXX)
+trap  'rm "$tmpfile"' 0 1 15
+cat > "$tmpfile"
+$TERMINAL -e "$EDITOR" "$tmpfile"
diff --git a/.local/bin/internet_test b/.local/bin/internet_test
new file mode 100755
index 0000000..099be10
--- /dev/null
+++ b/.local/bin/internet_test
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+ping -c 3 jacksontaylor.xyz
diff --git a/.local/bin/linkhandler b/.local/bin/linkhandler
new file mode 100755
index 0000000..7c7e96f
--- /dev/null
+++ b/.local/bin/linkhandler
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+# Feed script a url or file location.
+# If an image, it will view in sxiv,
+# if a video or gif, it will view in mpv
+# if a music file or pdf, it will download,
+# otherwise it opens link in browser.
+
+# If no url given. Opens browser. For using script as $BROWSER.
+[ -z "$1" ] && { "$BROWSER"; exit; }
+
+case "$1" in
+	*mkv|*webm|*mp4|*youtube.com/watch*|*youtube.com/playlist*|*youtu.be*|*hooktube.com*|*bitchute.com*)
+		setsid -f mpv -quiet "$1" >/dev/null 2>&1 ;;
+	*png|*jpg|*jpe|*jpeg|*gif)
+		curl -sL "$1" > "/tmp/$(echo "$1" | sed "s/.*\///")" && sxiv -a "/tmp/$(echo "$1" | sed "s/.*\///")"  >/dev/null 2>&1 & ;;
+	*mp3|*flac|*opus|*mp3?source*)
+		setsid -f tsp curl -LO "$1" >/dev/null 2>&1 ;;
+	*)
+		if [ -f "$1" ]; then "$TERMINAL" -e "$EDITOR" "$1"
+	else setsid -f "$BROWSER" "$1" >/dev/null 2>&1; fi ;;
+esac
diff --git a/.local/bin/mpdup b/.local/bin/mpdup
new file mode 100755
index 0000000..af81a7d
--- /dev/null
+++ b/.local/bin/mpdup
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# This loop will update the mpd statusbar module whenever a command changes the
+# music player's status. mpd must be running on X's start for this to work.
+
+while : ; do
+	mpc idle >/dev/null && kill -45 "$(pidof "${STATUSBAR:-dwmblocks}")" || break
+done
diff --git a/.local/bin/newsup b/.local/bin/newsup
new file mode 100755
index 0000000..29f2b3c
--- /dev/null
+++ b/.local/bin/newsup
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# Set as a cron job to check for new RSS entries for newsboat.
+# If newsboat is open, sends it an "R" key to refresh.
+
+ping -q -c 1 example.org > /dev/null || exit
+
+/usr/bin/notify-send "📰 Updating RSS feeds..."
+
+pgrep -f newsboat$ && /usr/bin/xdotool key --window "$(/usr/bin/xdotool search --name newsboat)" R && exit
+
+echo 🔃 > /tmp/newsupdate
+pkill -RTMIN+6 "${STATUSBAR:-dwmblocks}"
+/usr/bin/newsboat -x reload
+rm -f /tmp/newsupdate
+pkill -RTMIN+6 "${STATUSBAR:-dwmblocks}"
+/usr/bin/notify-send "📰 RSS feed update complete."
diff --git a/.local/bin/opout b/.local/bin/opout
new file mode 100755
index 0000000..f81daa2
--- /dev/null
+++ b/.local/bin/opout
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# opout: "open output": A general handler for opening a file's intended output,
+# usually the pdf of a compiled document.  I find this useful especially
+# running from vim.
+
+basename="$(echo "$1" | sed 's/\.[^\/.]*$//')"
+
+case "$1" in
+	*.tex|*.md|*.[rR]md|*.ms|*.me|*.mom) setsid "$READER" "$basename".pdf >/dev/null 2>&1 & ;;
+	*.[0-9]) setsid "$READER" "$basename".pdf >/dev/null 2>&1 & ;;
+	*.html) setsid $BROWSER "$basename".html >/dev/null 2>&1 & ;;
+	*.sent) setsid sent "$1" >/dev/null 2>&1 & ;;
+esac
diff --git a/.local/bin/read_books b/.local/bin/read_books
new file mode 100755
index 0000000..3ff2411
--- /dev/null
+++ b/.local/bin/read_books
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+#DMENU_OPTION="dmenu -fn \"hack:size=10\" -nb \"#3c302e\" -nf \"#bbbbbb\" -sb  \"#a86438\" -sf \"#000000\" -l 20"
+
+#du -a ~/Documents/books/* | awk '/\.pdf/{print $2}' | dmenu -fn "hack:size=10" -nb "#3c302e" -nf "#bbbbbb" -sb "#a86438" -sf "#000000" -l 20 | xargs -r $READER ;
+book=$(du -a ~/Documents/books/* | awk '/\.pdf/{print $2}' | dmenu -fn "hack:size=10" -nb "#3c302e" -nf "#bbbbbb" -sb "#a86438" -sf "#000000" -l 20);
+if [ -n $book ]; then $READER $book; fi
+
diff --git a/.local/bin/set_wallpaper b/.local/bin/set_wallpaper
new file mode 100755
index 0000000..3229094
--- /dev/null
+++ b/.local/bin/set_wallpaper
@@ -0,0 +1,10 @@
+#!/bin/sh
+pape=$1
+
+if [ -z "$pape" ]
+then
+    pape=$WALLPAPER
+fi
+
+xwallpaper --zoom $pape
+wal -i $pape
diff --git a/.local/bin/statusbar/battery b/.local/bin/statusbar/battery
new file mode 100755
index 0000000..f42d096
--- /dev/null
+++ b/.local/bin/statusbar/battery
@@ -0,0 +1,34 @@
+#!/bin/sh
+
+# Prints all batteries, their percentage remaining and an emoji corresponding
+# to charge status (🔌 for plugged up, 🔋 for discharging on battery, etc.).
+
+case $BLOCK_BUTTON in
+	3) notify-send "🔋 Battery module" "🔋: discharging
+🛑: not charging
+♻: stagnant charge
+🔌: charging
+⚡: charged
+❗: battery very low!
+- Scroll to change adjust xbacklight." ;;
+	4) xbacklight -inc 10 ;;
+	5) xbacklight -dec 10 ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# acpi alternative
+# acpi | sed "s/Battery [0-9]: //;s/[Dd]ischarging, /🔋/;s/[Nn]ot charging, /🛑/;s/[Cc]harging, /🔌/;s/[Uu]nknown, /♻️/;s/[Ff]ull, /⚡/;s/ \(remaining\|until charged\)//"; exit
+
+# Loop through all attached batteries.
+for battery in /sys/class/power_supply/BAT?
+do
+	# Get its remaining capacity and charge status.
+	capacity=$(cat "$battery"/capacity 2>/dev/null) || break
+	status=$(sed "s/[Dd]ischarging/🔋/;s/[Nn]ot charging/🛑/;s/[Cc]harging/🔌/;s/[Uu]nknown/♻️/;s/[Ff]ull/⚡/" "$battery"/status)
+
+	# If it is discharging and 25% or less, we will add a ❗ as a warning.
+	 [ "$capacity" -le 25 ] && [ "$status" = "🔋" ] && warn="❗"
+
+	printf "%s%s%s%% " "$status" "$warn" "$capacity"
+	unset warn
+done | sed 's/ *$//'
diff --git a/.local/bin/statusbar/clock b/.local/bin/statusbar/clock
new file mode 100755
index 0000000..04deca4
--- /dev/null
+++ b/.local/bin/statusbar/clock
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+clock=$(date '+%I')
+
+case "$clock" in
+	"00") icon="🕛" ;;
+	"01") icon="🕐" ;;
+	"02") icon="🕑" ;;
+	"03") icon="🕒" ;;
+	"04") icon="🕓" ;;
+	"05") icon="🕔" ;;
+	"06") icon="🕕" ;;
+	"07") icon="🕖" ;;
+	"08") icon="🕗" ;;
+	"09") icon="🕘" ;;
+	"10") icon="🕙" ;;
+	"11") icon="🕚" ;;
+	"12") icon="🕛" ;;
+esac
+
+case $BLOCK_BUTTON in
+	1) notify-send "This Month" "$(cal --color=always | sed "s/..7m/<b><span color=\"red\">/;s/..27m/<\/span><\/b>/")" && notify-send "Appointments" "$(calcurse -D ~/.config/calcurse -d3)" ;;
+	2) setsid -f "$TERMINAL" -e calcurse -D ~/.config/calcurse ;;
+	3) notify-send "📅 Time/date module" "\- Left click to show upcoming appointments for the next three days via \`calcurse -d3\` and show the month via \`cal\`
+- Middle click opens calcurse if installed" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+date "+%a %m/%d/%y $icon%I:%M%p"
+# date "+%Y %b %d (%a) $icon%I:%M%p"
diff --git a/.local/bin/statusbar/mailbox b/.local/bin/statusbar/mailbox
new file mode 100755
index 0000000..ca77f5c
--- /dev/null
+++ b/.local/bin/statusbar/mailbox
@@ -0,0 +1,20 @@
+#!/bin/sh
+
+# Displays number of unread mail and an loading icon if updating.
+# When clicked, brings up `neomutt`.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e neomutt ;;
+	2) setsid -f mailsync >/dev/null ;;
+	3) notify-send "📬 Mail module" "\- Shows unread mail
+- Shows 🔃 if syncing mail
+- Left click opens neomutt
+- Middle click syncs mail" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+unread="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/*/[Ii][Nn][Bb][Oo][Xx]/new/* -type f | wc -l 2>/dev/null)"
+
+pidof mbsync >/dev/null 2>&1 && icon="🔃"
+
+[ "$unread" = "0" ] && [ "$icon" = "" ] || echo "📬$unread$icon"
diff --git a/.local/bin/statusbar/music b/.local/bin/statusbar/music
new file mode 100755
index 0000000..faba0c3
--- /dev/null
+++ b/.local/bin/statusbar/music
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+filter() { mpc | sed "/^volume:/d;s/\\&/&amp;/g;s/\\[paused\\].*/⏸/g;/\\[playing\\].*/d" | paste -sd ' ';}
+
+pidof -x mpdup >/dev/null 2>&1 || mpdup >/dev/null 2>&1 &
+
+case $BLOCK_BUTTON in
+	1) mpc status | filter ; setsid -f "$TERMINAL" -e ncmpcpp ;;  # right click, pause/unpause
+	2) mpc toggle | filter ;;  # right click, pause/unpause
+	3) mpc status | filter ; notify-send "🎵 Music module" "\- Shows mpd song playing.
+- Italic when paused.
+- Left click opens ncmpcpp.
+- Middle click pauses.
+- Scroll changes track.";;  # right click, pause/unpause
+	4) mpc prev   | filter ;;  # scroll up, previous
+	5) mpc next   | filter ;;  # scroll down, next
+	6) mpc status | filter ; "$TERMINAL" -e "$EDITOR" "$0" ;;
+	*) mpc status | filter ;;
+esac
diff --git a/.local/bin/statusbar/news b/.local/bin/statusbar/news
new file mode 100755
index 0000000..a850aff
--- /dev/null
+++ b/.local/bin/statusbar/news
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+# Displays number of unread news items and an loading icon if updating.
+# When clicked, brings up `newsboat`.
+
+case $BLOCK_BUTTON in
+        1) setsid "$TERMINAL" -e newsboat ;;
+        2) setsid -f newsup >/dev/null exit ;;
+        3) notify-send "📰 News module" "\- Shows unread news items
+- Shows 🔃 if updating with \`newsup\`
+- Left click opens newsboat
+- Middle click syncs RSS feeds
+<b>Note:</b> Only one instance of newsboat (including updates) may be running at a time." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+ # cat /tmp/newsupdate 2>/dev/null || echo "$(newsboat -x print-unread | awk '{ if($1>0) print "📰" $1}')$(cat "${XDG_CONFIG_HOME:-$HOME/.config}"/newsboat/.update 2>/dev/null)"
+ cat /tmp/newsupdate 2>/dev/null || echo "$(newsboat -x print-unread | awk '{ if($1>-1) print "📰" $1}')$(cat "${XDG_CONFIG_HOME:-$HOME/.config}"/newsboat/.update 2>/dev/null)"
diff --git a/.local/bin/statusbar/volume b/.local/bin/statusbar/volume
new file mode 100755
index 0000000..2766ed2
--- /dev/null
+++ b/.local/bin/statusbar/volume
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+# Prints the current volume or 🔇 if muted. Uses PulseAudio by default,
+# uncomment the ALSA lines if you remove PulseAudio.
+
+case $BLOCK_BUTTON in
+	# 1) setsid -f "$TERMINAL" -e alsamixer ;;
+	# 2) amixer sset Master toggle ;;
+	# 4) amixer sset Master 5%+ >/dev/null 2>/dev/null ;;
+	# 5) amixer sset Master 5%- >/dev/null 2>/dev/null ;;
+	1) setsid -f "$TERMINAL" -e pulsemixer ;;
+	2) pamixer -t ;;
+	4) pamixer --allow-boost -i 1 ;;
+	5) pamixer --allow-boost -d 1 ;;
+	3) notify-send "📢 Volume module" "\- Shows volume 🔊, 🔇 if muted.
+- Middle click to mute.
+- Scroll to change." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+volstat="$(pactl list sinks)"
+# volstat="$(amixer get Master)" # ALSA only equivalent.
+
+echo "$volstat" | grep -q "Mute: yes" && printf "🔇\\n" && exit
+# echo "$volstat" | grep "\[off\]" >/dev/null && printf "🔇\\n" && exit # ALSA
+
+vol="$(echo "$volstat" | grep '[0-9]\+%' | sed "s,.* \([0-9]\+\)%.*,\1,;1q")"
+# vol=$(echo "$volstat" | grep -o "\[[0-9]\+%\]" | sed "s/[^0-9]*//g;1q") # ALSA
+
+if [ "$vol" -gt "70" ]; then
+	icon="🔊"
+elif [ "$vol" -lt "30" ]; then
+	icon="🔈"
+else
+	icon="🔉"
+fi
+
+printf "%s%s%%\\n" "$icon" "$vol"
diff --git a/.local/bin/statusbar/weather b/.local/bin/statusbar/weather
new file mode 100755
index 0000000..e04bac0
--- /dev/null
+++ b/.local/bin/statusbar/weather
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# Displays todays precipication chance (☔) and daily low (🥶) and high (🌞).
+# Usually intended for the statusbar.
+
+# If we have internet, get a weather report from wttr.in and store it locally.
+# You could set up a shell alias to view the full file in a pager in the
+# terminal if desired. This function will only be run once a day when needed.
+weatherreport="${XDG_DATA_HOME:-$HOME/.local/share}/weatherreport"
+getforecast() { curl -sf "wttr.in/$LOCATION" > "$weatherreport" || exit 1 ;}
+
+# Some very particular and terse stream manipulation. We get the maximum
+# precipication chance and the daily high and low from the downloaded file and
+# display them with coresponding emojis.
+showweather() { printf "%s" "$(sed '16q;d' "$weatherreport" |
+	grep -wo "[0-9]*%" | sort -rn | sed "s/^/☔/g;1q" | tr -d '\n')"
+sed '13q;d' "$weatherreport" | grep -o "m\\([-+]\\)*[0-9]\\+" | sort -n -t 'm' -k 2n | sed -e 1b -e '$!d' | tr '\n|m' ' ' | awk '{print " 🥶" $1 "°","🌞" $2 "°"}' ;}
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e less -Srf "$weatherreport" ;;
+	2) getforecast && showweather ;;
+	3) notify-send "🌈 Weather module" "\- Left click for full forecast.
+- Middle click to update forecast.
+☔: Chance of rain/snow
+🥶: Daily low
+🌞: Daily high" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# The test if our forcecast is updated to the day. If it isn't download a new
+# weather report from wttr.in with the above function.
+[ "$(stat -c %y "$weatherreport" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] ||
+	getforecast
+
+showweather
diff --git a/.local/bin/texclear b/.local/bin/texclear
new file mode 100755
index 0000000..2061a2e
--- /dev/null
+++ b/.local/bin/texclear
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+# Clears the build files of a LaTeX/XeLaTeX build.
+# I have vim run this file whenever I exit a .tex file.
+
+case "$1" in
+	*.tex)
+	file=$(readlink -f "$1")
+	dir=$(dirname "$file")
+	base="${file%.*}"
+	find "$dir"  -maxdepth 1 -type f -regextype gnu-awk -regex "^$base\\.(4tc|xref|tmp|pyc|pyo|fls|vrb|fdb_latexmk|bak|swp|aux|log|synctex\\(busy\\)|lof|lot|maf|idx|mtc|mtc0|nav|out|snm|toc|bcf|run\\.xml|synctex\\.gz|blg|bbl)" -delete ;;
+	*) printf "Give .tex file as argument.\\n" ;;
+esac
diff --git a/.local/bin/unix b/.local/bin/unix
new file mode 100755
index 0000000..a9fb96e
--- /dev/null
+++ b/.local/bin/unix
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+#original artwork by http://www.sanderfocus.nl/#/portfolio/tech-heroes
+#converted to shell by #nixers @ irc.unix.chat
+
+cat << 'eof'
+                     ,_ ,_==▄▂
+                  ,  ▂▃▄▄▅▅▅▂▅¾.            /    /
+                   ▄▆<´  "»▓▓▓%\       / /   / /
+                 ,▅7"     ´>▓▓▓%   /  / > / >/%
+                 ▐¶▓       ,»▓▓¾´  /> %/%// /  /
+                  ▓▃▅▅▅▃,,▄▅▅▅Æ\// ///>// />/   /
+                 V║«¼.;→ ║<«.,`=// />//%/% / /
+               //╠<´ -²,)(▓~"-╝/¾/ %/>/ />
+           / / / ▐% -./▄▃▄▅▐, /7//;//% / /
+           / ////`▌▐ %zWv xX▓▇▌//&;% / /
+       / / / %//%/¾½´▌▃▄▄▄▄▃▃▐¶\/& /
+         </ /</%//`▓!%▓%╣[38;5;255;╣WY<Y)y&/`\
+     / / %/%//</%//\i7; ╠N>)VY>7;  \_    UNIX IS VERY SIMPLE IT JUST NEEDS A
+  /   /</ //<///<_/%\▓  V%W%£)XY  _/%‾\_,   GENIUS TO UNDERSTAND ITS SIMPLICITY
+   / / //%/_,=--^/%/%%\¾%¶%%}    /%%%%%%;\,
+    %/< /_/ %%%%%;X%%\%%;,     _/%%%;,     \
+   / / %%%%%%;,    \%%l%%;// _/%;, dmr
+ /    %%%;,         <;\-=-/ /
+     ;,                l
+eof